Mitsubishi Electric MELDAS C6 Programming Manual page 323

Device Item
(S1)+13 Date/Hour of error
occurrence
(S1)+14 Minute/Second of
error occurrence
(S1)+15 Day of the week of
error occurrence
(S1)+16 Error detection
network No.
(S1)+17 Error detection
station No.
Execution conditions
The execution conditions for READ, SREAD, WRITE, SWRITE are as shown below.
Command
G.READ, G.SREAD
G.WRITE, G.SWRITE
GP.READ, GP.SREAD
GP.WRITE, GP.SWRITE
9. Exclusive Commands 1
READ, SREAD, WRITE, SWRITE
Set data
Higher 8 bits : hour (00H to 23H),
lower 8 bits : date (01H to 31H)
b15 to b8
Hour (00H to 23H)
Higher 8 bits : second (00H to 59H),
lower 8 bits : minute (00H to 59H)
b15 to b8
Second (00H to 59H) Minute (00H to 59H)
Higher 8 bits : 00H,
lower 8 bits : day of the week
(00H(Sunday) to 06H(Saturday))
b15 to b8
00H
Stores the network number of the station that
detected an error.
However, it is not stored when the completion
status of (S1)+1 is "Channel in use (C085H)."
1 to 239 (Network No.)
Stores the station number of the station that
detected an error.
However, it is not stored when the completion
status of (S1)+1 is "Channel in use (C085H)."
1 to 64 (Station No.)
ON
OFF
Executed per scan
- 314 -
Get other manuals https://www.bkmanuals.com
Setting
range
b7 to b0
Date (01H to 31H)
b7 to b0
b7 to b0
Day of week
(00H to 06H)
1 to 239
1 to 64
Executed per scan
Set by
— System
— System
— System
System
System