MPS, MRD, MPP ... Registering, reading and clearing of operation results
Bit device
X
Y
M
L
F
B SB T SM V T
Function
MPS
(1) The operation results (ON/OFF) just before the MPS command are registered.
(2) The MPS command can be used consecutively up to four times. If the MPP command is used in
between, the No. of MPS usages will be decremented by one.
MRD
(1) The operation results registered with the MPS command are read, and the operation is continued
from the next step using those operation results.
MPP
(1) The operation results registered with the MPS command are read, and the operation is continued
from the next step using those operation results.
(2) The operation results registered with the MPS command are cleared.
7. Basic Commands
MPS, MRD, MPP
Usable device
Word device
C D R W SW Z SD K
MPS, MRD and MPP are not displayed.
MPS
MRD
MPP
- 138 -
Get other manuals https://www.bkmanuals.com
Digit
Con-
Pointer
desig-
Index
stant
nation
H
P
No. of
steps
1