Plc4B Plc Development Environment (M500) And Differences; Development Tools, Etc - Mitsubishi Electric MELDAS C6 Programming Manual

1. PLC Development Environment Using GX Developer

1.6 PLC4B PLC Development Environment (M500) and Differences

1.6 PLC4B PLC Development Environment (M500) and Differences
This section explains differences between the PLC4B development environment and C64 series
PLC development environment.

1.6.1 Development Tools, etc.

In the C64 series, a user PLC development environment that used the MELSEC PLC development
tool was constructed. Consequently, the tools used at each development process differ. A
comparison of each process is shown in the following table "List of development tool comparisons".
Refer to the respective lnstruction Manuals for details on each tool.
Development
process
Application from the
old model
List -> ladder
conversion
Ladder creation
Message creation
Transfer to the CNC
Monitor
Print output
List of development tool comparisons
Tool Ladder and message conversion tool
(CHG4PB)
Hardware PC9801/PC-AT
Tool PLC development software
(list section) (LIST4B)
Hardware PC9801/PC-AT
Tool PLC development software
(ladder section) (PLC4B)
Hardware PC9801/PC-AT
Tool PLC development software
(ladder section) (PLC4B)
Hardware PC9801/PC-AT
Tool PLC4B <-> FLD <-> M500 controller
Hardware Via FLD
Tool
Hardware
Tool (1) PLC development software
(ladder section) (PLC4B)
Hardware PC9801/PC-AT
Tool (2) PLC onboard (ONBD)
Hardware M500 controller
- 46 -
Get other manuals https://www.bkmanuals.com
M500
Ladder list converter (CLST6L) ∗1
PC-AT
GX Converter
PC-AT
GX Developer
PC-AT
Text editor -> GX Converter ->
GX Developer
PC-AT
GX Developer <-> RS232C <->
CNC controller
Via RS-232C
GX Developer
PC-AT <-> CNC controller
GX Developer
PC-AT
C64