Mitsubishi Electric MELDAS C6 Programming Manual page 117

OR, ORI ... Parallel connection of one contact
Bit device
X Y M L F B SB T SM V T
(Note) In the modification of index, 2 steps are used for B or SB device.
OR
ORI
Function
OR is the one A contact parallel connection command, and ORI is the one B contact parallel
connection operation command. The ON/OFF information of the designated device is read in, and the
OR operation with the operation results up to that point is executed. The result is the operation result.
Execution conditions
This is executed per scan regardless of the operation results before the OR, ORI commands.
7. Basic Commands
OR, ORI
Usable device
Word device
C D R W SW Z SD K
X0
X0
- 108 -
Get other manuals https://www.bkmanuals.com
Con-
Pointer
stant
H P
Device No.
Digit
No. of
desig- Index
steps
nation
1/2