Mitsubishi Electric MELDAS C6 Programming Manual page 356

(7) Tool table "FWD" rotation
The tool table rotates in "FWD" direction in accordance with the magazine rotation.
ACT
S.ATC K7
R4750 1000
R4751 1001
： ：
： ：
R4760 1010
(8) Tool table "REV" rotation
The tool table rotates in "REV" direction in accordance with the magazine rotation.
ACT
S.ATC K8
R4750 1000
R4751 1001
：
：
： ：
R4759 1009
10. Exclusive Commands 2
10.1 ATC Exclusive Command
R4710 R4710 M10
(Note 1) In this control mode, pointer always indicates "0"
(tool table head).
(Note 2) When this command is executed, the relationship
between magazine No. and tool No., appearing on the tool entry
display, changes accordingly.
M10
R4710 R4710
(Note 1) In this control mode, pointer always indicates "0"
(tool table head).
(Note 2) When this command is executed, the relationship
between magazine No. and tool No., appearing on the tool entry
display, changes accordingly.
- 347 -
Get other manuals https://www.bkmanuals.com