Mitsubishi Electric MELDAS C6 Programming Manual page 418

Hide thumbs Also See for MELDAS C6:

Table of Contents

(3) For reference point return feed mode

(3-1) Dog-type reference point return

(Note 1) The axis moves by reference point return feed only during start ON. Turn the start OFF

after confirming that the reference point has been reached.

(Note 2) The first reference point return after the power is turned ON is always dog-type. All returns

after that are high-speed reference point returns.

(3-2) High-speed reference point return

12. PLC Axis Control

12.3 PLC Interface

Get other manuals https://www.bkmanuals.com