Mitsubishi Electric MELDAS C6 Programming Manual page 466

Appendix 3. PLC Development Environment using GPPQ
3.6.4 Conversion to GPPQ Data
"CNVQ (data conversion software package)" is used in the conversion from text data to GPPQ data.
It is also possible to convert to GPPQ data from spreadsheet software instead of text data. Refer to
the Operating Manual for details.
(1) Initialization
After CNVQ is started, the project file (file for setting the drive/path name, system name, machine
name, file name, etc.) is read or newly created.
Refer to the Operating Manual for the operation method.
(2) Conversion Format Setting
The screen is selected from the menu using the following CNVQ basic operation.
F11 ( HOME CLR )
Mode
The conversion format is set on the following screen. Select the "Statement" item shown by the
arrow (1) when converting message data.
Refer to the Operating Manual for details.
[Command list (text format setting)]
1. Delimter
1. ( * ) Tab
2. ( * ) Space
2. Input Conditions
1. ( ) Step #
2. ( ) Device Comment
3. ( * ) Statement
4. ( ) Note
5. ( ) Device Label
6. ( ) Without NOP
3.6 PLC-Related Data Development Procedure
Mode
Conversion
selection
3 format set-
menu screen
ting screen
Conversion
format setting
Conversion Command
7 list menu
format change
menu window
Command
list
1. ( * ) Auto Adjust (1Tab [ 8]Column)
2. ( ) Left Align
3. ( ) Specify
1. ( * ) Auto Adjust
2. ( ) Left Align
3. ( ) Specify
Execute(Y)
Space : Select
- 457 -
Get other manuals https://www.bkmanuals.com
Alt ( GRPH )
Menu
Command list
(text format
2
setting)
window
screen
Text format
setting
[ 1]Tab
[ 1]Column
Cancel(N)
Esc : Close
3
Conversion
format change
(1)