Reading The Plc Program From The Cnc - Mitsubishi Electric MELDAS C6 Programming Manual

1. PLC Development Environment Using GX Developer

1.3.6 Reading the PLC Program from the CNC

The following indicates how to read a ladder from the CNC to GX Developer.
(1) Operation procedure
Perform the following operation from GX Developer to start the operation screen.
[Online] → [Read from PLC]
On the following screen, choose the ladder file to be read from the [File selection] tab, and click
[Execute].
(Note) As [Target memory], the fitted memory is valid.
Do not set the other tabs ([Device data], [Program], [Common], [Local]) than [File
selection].
The [Read from PLC] screen can also be used as a CNC side file listing function. Move the scroll
bar of the [File selection] tab to the right to display the write date and size of each file. Click [Free
space volume] to display the free area of the target memory.
1.3 Developing PLC Programs
- 20 -
Get other manuals https://www.bkmanuals.com