Mitsubishi Electric MELDAS C6 Programming Manual page 373

10.3 Tool Life Management Exclusive Command
<When tool is changed>
When tool is changed, the spindle tool number is set in R6350, R6351. (User PLC)
Spindle tool number
(R6350-R6351)
Standby tool number
(R6352-R6353)
Spindle tool data
(R6354-R6355)
10. Exclusive Commands 2
Tool data file
NC
(Controller internal data)
When the spindle tool number changes, the
controller assumes that the spindle tool is changed,
and searches the tool data file for the tool data of
the new tool.
The controller executes life management and tool
offset based on the tool data. It also outputs the tool
data to R6354~R6365 every user PLC main cycle.
- 364 -
Get other manuals https://www.bkmanuals.com