Function Table; Setting The Function Table - A&D BM series Instruction Manual

10. Function Table

The function table reads or rewrites the parameters that are stored in the balance.
These parameters are maintained in non-volatile memory, even if the AC adapter is removed.
The function table menu consists of two layers. The first layer is the "Class" and the second layer
is the "Item".

Setting the Function Table

10.1.
Display symbol and keys
The symbol " " indicates that the parameter displayed is in effect.
When pressed and held (for approx. 2 seconds) in the weighing mode, enters the
function table mode.
Selects the class or item in the function table mode.
Changes the parameter.
When a class is displayed, enters an item in the class.
When an item is displayed, stores the new parameter and displays the next
class.
When an item is displayed, cancels the new parameter and displays the next
class.
When a class is displayed, exits the function table mode and returns to the
weighing mode.
Setting procedure
1 In the weighing mode, press and hold the
displayed, then release the key
2 Press the
RANGE
3 Press the
PRINT
4 Press the
RANGE
5 Press the
RE-ZERO
6 Repeat Steps 4 and 5 to select other items of the class.
7 To store the parameters of the selected class, press the
Then the next class is displayed.
To cancel the current operation, press the
8 To specify parameters for another class, proceed to Step 2.
To finish the setting, press the
BM series
key to select a class.
key to enter the class
key to select an item.
key to select a parameter for the selected item.
key to return to the weighing mode.
CAL
key (for approx. 2 seconds) until
RANGE
PRINT
key. Then the next class is displayed.
CAL
45
key.
is
ba5fnc