Table of Contents
Advertisement
PAPER PATH
15 July 1996
6.2 MULTIPLE 2-SIDED COPYING
a. Front Side
[D]
[A]
[C]
[B]
A176V508.wmf
b. Rear Side
A176V509.wmf
In this mode the junction gate [A] directs sheets exiting the fusing unit to the
duplex tray entrance. After that, all sheets follow the path through the duplex
entrance rollers [B].
After all front side copying is completed, the sheets on the duplex tray are fed
in order from the bottom to the top and follow the path through the duplex
feed mechanism and vertical transport rollers [C] to the registration rollers
[D]. After that, these sheets follow the same path as standard copying from
the registration rollers to the sorter.
1-16
Advertisement
Table of Contents
