Table of Contents
Advertisement
15 July 1996
2.12 LENS VERTICAL DRIVE BELT REMOVAL
1. Remove the third scanner drive unit. (Refer to Third Scanner Drive Motor
Replacement.)
2. Remove the front bracket [A]. (Refer to Scanner Drive Wires
Replacement.)
3. Remove the lens unit [B]. (Refer to Lens Horizontal Drive Belt
Replacement.)
4. Loosen the two screws [C] fixing the tension pulley bracket [D].
5. Push the tension pulley bracket to the left (front view) then unhook the
timing belt.
[A]
[B]
A176R563.wmf
5-37
[D]
[C]
OPTICS
A176R564.wmf
Advertisement
Table of Contents
