ENERGY SAVING INFORMATION
3. Press the Program key.
4. Touch the [Store Program] key.
5. Touch the [5] key.
Then, the display shows "Program
5 has been stored. Do you want to
revise the program?".
6. Touch the [Yes] key to overwrite
a new program.
7. Touch the [5] key again to enter
a new program.
Changing Duplex Default Mode
To change a duplex mode set at the factory as a default to an another duplex
mode you need as a default, select the appropriate duplex mode and
overwrite it in Program 5 as follows;
1. Press the Clear Modes key.
2. Touch the [Duplex/Series Copies]
key to cancel the duplex mode.
Then, touch the [Duplex/Series
Copies] key again and select the
appropriate duplex mode as a
default.
•
For the sorter stapler system, you
can select either "Two sided copies
from an odd number of originals"
or "Two sided copies from two
sided originals".
•
For the finisher system, you can
select "Two sided copies from two
sided originals".
Note: The illustration on the right shows
display for the document feeder
and the sorter stapler system.
2-112
15 July 1996
4
5
A176D648.img
A176D647-2.img