Table of Contents
Advertisement
LCT (A609)
[D]
[C]
[A]
9. Install the LCT connector [A] to the copier.
1) Remove the three caps [B].
2) Set the two pins [C] of the LCT connector into the two holes [D] on the
LCT feed unit.
3) Install the LCT connector to the copier (3 screws - M4 x 16).
10. Remove the screw fixing the upper cover hinge [E] then slide and remove
the LCT cover [F].
11. Remove the rear upper cover [G] (2 screws).
[D]
[B]
A609I507.wmf
[F]
3-44
15 July 1996
[G]
[E]
A609I508.wmf
Advertisement
Table of Contents
