Table of Contents
Advertisement
15 July 1996
2.6 KEY COUNTER HOLDER INSTALLATION (OPTION)
[B]
CAUTION
Unplug the copier power cord before starting the following procedure.
NOTE: The Key Counter Bracket Set includes the following parts. The key
counter holder and key counter should be procured locally.
1. Key Counter Bracket ................................................................. 1
2. Key Counter Plate Nut............................................................... 2
3. Key Counter Cover .................................................................... 1
4. Accessory Harness.................................................................... 1
5. Screws ....................................................................................... 4
6. Stepped Screw .......................................................................... 1
1. Remove the two plastic caps [A] and [B] on the right upper cover of the
copier.
2. Replace the short-circuit connector [C] with the connector of the
accessory harness [D].
3. Install the stepped screw [E].
[E]
[D]
3-19
COPIER INSTALLATION
[C]
[A]
A176I525.wmf
Advertisement
Table of Contents
