Ricoh A220 Service Manual page 403

8 July 1996
- Installation -
[A]
[C]
1. Set the paper exit unit in the following order:
1) Set the drive shaft [A] on the left rail [B].
2) Set the plate [C] on the right rail [D].
3) Set the positioning pin [E] in the hole [F].
2. Install the paper exit unit (2 connectors, 4 screws).
3. Re-assemble the copier.
[B]
[E]
5-103
FUSING UNIT
[D]
[F]
A176R675.wmf