Table of Contents
Advertisement
15 July 1996
6.9 BY-PASS FEED ROLLERS REPLACEMENT
1. Open the by-pass feed table then remove the cover [A] (3 screws).
2. Replace the pick-up roller [B] (1 snap ring) and the feed roller [C] (1 snap
ring).
NOTE: The paper feed (pick-up, feed, separation) rollers used in the
by-pass feed table and LCT are different from the paper feed rollers
used in the 1st ~ 3rd feed units in the paper tray unit. They are not
interchangeable.
A176R635.wmf
[A]
[C]
5-77
PAPER FEED
[B]
A176R636.wmf
Advertisement
Table of Contents
