Table of Contents
Advertisement
DUPLEX UNIT
8.6.6 Scanner Height Adjustment
When:
Purpose:
How:
[A]
A176R566.wmf
Leading edge
Original
1. Remove the exposure glass.
2. Remove the lens unit cover [A] (2 screws).
3. Adjust the 3rd scanner [B] height by the adjustment screw [C].
If optically skewed images appear after adjusting
the 1st and 2nd scanner positions.
To maintain a proper copy image.
Turn the 3rd scanner height adjusting cam.
This changes the 3rd scanner's height.
[B]
Copy
A176R523.wmf
5-124
[C]
Front advanced against leading and
trailing erase edge:
Raise adjustment screw
Rear advanced against leading and
trailing erase edge:
Lower adjustment screw
8 July 1996
A176R567.wmf
Advertisement
Table of Contents
