Table of Contents
Advertisement
15 July 1996
4.7 PICK-OFF PAWL REPLACEMENT
[C]
1. Remove the bushing [A] (1 screw and retaining ring).
2. While pulling the shaft [B] to the rear, turn the pick-off pawl about 45
degree clockwise (front view) and move up the pick-off pawl.
3. Replace the pick-off pawl [C].
NOTE: Do not forget to hook the tension spring [D].
After replacement, check the smooth movement of the pick-off
pawl.
[D]
5-55
DRUM UNIT
[A]
[B]
A176R597.wmf
Advertisement
Table of Contents
