Table of Contents
Advertisement
DUAL JOB FEEDER (A610)
[C]
[A]
[B]
F a c e u p
Mit der Schriftseite
n a c h o b e n
F a c e i m p r i m é e
d e u u u s
Faccia in su
Boca arriba
A610I515.wmf
7. Remove the small cap on the upper rear cover, then connect the main
connector [A] and the fiber optic cable connector [B].
CAUTION
When connecting the fiber optic cable, make sure to mount it over
the main connector to prevent it from being bent.
8. Attach the sponge retainer [C] to the top cover as shown.
9. Secure the hinge stopper bracket [D], as shown (2 screws - M4 x 6).
10. Attach the feed-out guide mylar [E] under the original table. Attach it
between the 3rd [F] and 4th [G] ribs (counting from the rear).
11. Apply appropriate decal at [H].
12. Plug in the copier and turn on the main switch.
NOTE: The copier automatically recognizes that the DF has been
installed.
13. Make copies using the DF and confirm the machine functions properly.
14. Explain to the customer that some settings may now be changed,
according to the characteristics of each original.
A610I514.wmf
[H]
3-26
[E]
[F]
A610I508.wmf
15 July 1996
[D]
A610I507.wmf
[G]
Advertisement
Table of Contents
