Table of Contents
Advertisement
15 July 1996
[C]
[G]
5. Open the by-pass table [A] approximately 45 degrees and push the
stoppers [B] of the feed unit cover [C] by using a small flat head screw
driver [D], then remove the feed unit cover.
6. Remove the harness cover [E].
7. Remove the shipping retainers [F].
8. Install the LCT feed unit [G] to the copier (3 screws - M 4 x 6).
CAUTION
Do not pinch the harness [H] located below the by-pass table.
[A]
[D]
[E]
[B]
A609I504.wmf
[H]
A609I506.wmf
3-43
[C]
[F]
LCT (A609)
A609I505.wmf
Advertisement
Table of Contents
