Table of Contents
Advertisement
FINISHER (A608)
[A]
[D] [E]
5. Remove five plastic caps [A] on the copier's left cover.
6. Install the front connecting bracket [B] (2 screws - M4 x 12) and the rear
connecting bracket [C] (2 screws - M4 x 12) on the copier.
7. Stick the entrance guide mylar [D] on the copier exit area as shown.
NOTE: Align the edge [E] of the cover and the mylar.
A608I502.wmf
[C]
[D]
A608I504.wmf
3-38
15 July 1996
[B]
A608I503.wmf
Advertisement
Table of Contents
