Table of Contents
Advertisement
15 July 1996
2.11 LENS HORIZONTAL DRIVE BELT REMOVAL
[A]
[B]
1. Remove the lens unit cover [A] and light shielding plate [B]. (Refer to
Scanner Drive Wires Replacement.)
2. Remove the light shielding mylar bracket [C] (1 screw).
NOTE: When re-installing the mylar bracket [C], be sure not to create
any gap between the bracket and the lens cover.
3. Remove the flat cable bracket [D] (1 screw, 2 connectors).
4. Position the roller [E] underneath the bracket [F].
A176R559.wmf
[D]
5-35
[C]
[F]
[E]
OPTICS
A176R560.wmf
Advertisement
Table of Contents
