Table of Contents
Advertisement
15 July 1996
6.4 TANDEM REAR FENCE DRIVE BELT REMOVAL
[D]
A176R620.wmf
1. Draw out the tandem tray.
2. Separate the right tandem tray from the left tandem tray [A]. (Refer to
Tandem Tray Removal.)
3. Remove the rear fence [B] on the left tandem tray (2 screws).
4. Remove the rear base plate [C] with the rear fence drive motor [D]
(3 screws, 1 connector, 1 grounding screw, and 1 grounding plate [E]).
5. Remove the end fence [F] (2 screws).
6. Remove the center bottom plate [G] (2 screws).
[E]
[B]
[A]
[C]
[F]
5-67
PAPER FEED
[G]
A176R621.wmf
Advertisement
Table of Contents
