Table of Contents
Advertisement
SORTER STAPLER (A606)
[C]
[D]
[A]
[B]
[I]
7. Secure the protective earth wire [A]* (1 screw) and the wire [B] (1 screw).
NOTE*: For all models other than those intended for North America, the
green wire is intended as a functional earth and should be
connected as shown.
8. Connect the 4P connector [C] and the fiber optic connector [D].
9. Open the front door of the sorter stapler and remove the screw [E] fixing
the locking lever [F], then lower the locking lever.
10. Stick the cushion [G] on the proof tray. Install the relay guide [H]
(2 screws).
11. Align and press the sorter stapler against the copier and fix them by
raising the locking lever [F].
12. Secure the locking lever (1 screw).
13. Install the proof tray [I].
A606I506.wmf
[F]
A606I508.wmf
3-30
[F]
[E]
15 July 1996
[G]
[H]
A606I507.wmf
Advertisement
Table of Contents
