Table of Contents
Advertisement
FINISHER (A608)
[D]
[A]
[B]
15. Install the shift tray [A] with 4 screws - M4 x 8 (remove tape [B]).
16. Adjust the height of the copier by using the leveling foot [C] so that the
difference in level between the copier [D] and the finisher will be
30 ± 1 mm.
17. To ensure grounding between the copier and finisher, insert caster
stoppers [E] under the caster as shown.
18. Plug in the copier.
19. Turn on the main switch of the copier and test the operation of the finisher.
NOTE: The copier recognizes automatically that the finisher is installed.
A608I508.img
[E]
3-40
15 July 1996
[C]
A608I509.img
A608I511.wmf
Advertisement
Table of Contents
