Table of Contents
Advertisement
15 July 1996
2.7 SCANNER DRIVE WIRES REPLACEMENT
- Removal -
[A]
[B]
1. Turn off the main switch.
2. Remove the exposure glass.
3. Remove the upper cover and the rear upper cover.
4. Remove the optics thermistor [A] (1 screw, 1 harness clamp).
5. Remove the scanner HP sensor with bracket . (Refer to Scanner HP
Sensor Replacement.)
6. Remove the scanner drive motor. (Refer to Scanner Drive Motor
Replacement)
7. Unhook the harness from the two harness clamps [B].
8. Remove the upper optics frame [C] (9 screws).
A176R527.wmf
5-17
OPTICS
[C]
A176R528.wmf
Advertisement
Table of Contents
