Table of Contents
Advertisement
DUPLEX UNIT
[C]
1. Enter SP mode (refer to Service Program Access Procedure) and
access
2. Access the appropriate page by touching the "Prev." [A] or "Next" [B] key.
3. Touch the "Copy in SP" key [C] then select the proper copy mode.
4. Make a copy of the OS-A3 chart.
5. Confirm if copy quality is within the adjustment standard.
6. If the copy quality is not correct, touch the "SP Mode" key [D] at the left
upper corner of the LCD panel.
7. Touch the – key [E] or the + key [F] to change the data, then repeat steps
3 to 6 until the copy quality becomes within the adjustment standard.
8. Exit the SP mode.
[A]
[D]
SP Adjustment mode.
[B]
A176R701.img
A176R702.img
5-118
8 July 1996
[E]
[F]
Advertisement
Table of Contents
