15 July 1996
3
DATA OUT MODE
PAGE 2
Item
Indicates the exposure lamp voltage
(ID Level 4) decided during process
control data initial setting.
Indicates the toner supply level by image
area ratio on the original surface.
This value changes every copy through
fuzzy control.
Indicates the transfer voltage detected in
the process control data initialization.
Indicates the current toner supply mode:
A176M524.img
Function
4-21
SERVICE PROGRAM MODE
PAGE 3
Note
Works only when auto process control is
enabled (
SP Adjustment - PAGE
7.)
Standard: 50 ~ 80 V
L: 0 ~ 3 kV
M: 3 ~ 5 kV
H: 5 kV ~
A: Auto Mode
T: Detected Mode (Drum potential sensor
or ID sensor abnormal)
C: Fixed Mode (TD sensor abnormal,
constant mode)
A176M525.img