Table of Contents
Advertisement
15 July 1996
2.5 ADS SENSOR REMOVAL
[C]
1. Remove the exhaust fan [A]. (Refer to Scanner HP Sensor Replacement.)
2. Remove the DJF/RDH connector bracket [B] (2 screws).
3. Remove the ADS Sensor [C] with the cover [D] (1 screw).
4. Replace the ADS Sensor [C] (2 screws).
5. Assemble the copier.
6. Turn on the main switch and enter SP mode, then perform the Auto ADS
initial setting (
[A]
A176R521-2.wmf
[B]
[D]
SP Adjustment - PAGE 5).
5-15
OPTICS
A176R524.wmf
Advertisement
Table of Contents
