DRUM UNIT
4.8 TONER COLLECTION MOTOR REPLACEMENT
A176R598.wmf
NOTE: Before starting the procedure remove the drum unit and the transfer
belt unit to prevent toner from dropping in the machine.
1. Open the front doors then remove the toner collection bottle [A]
(1 push-lock [B]).
2. Remove the upper and lower rear covers. (Refer to Upper and Lower
Rear Covers Removal.)
3. Remove the tank cover bracket [C] (2 screws).
4. Remove the toner collection motor [D] (2 connectors, 2 screws).
NOTE: When re-installing the toner collection motor, be sure to set the 2
positioning pins in the holes on the machine rear frame.
[A]
[B]
[D]
5-56
15 July 1996
[C]
A176R599.img