Table of Contents
Advertisement
15 July 1996
[A]
[C]
7. For the first copy, touch the – key [A] or the + key [B] to adjust the white
area width.
8. For the second copy, touch the – key [C] or the + key [D] to adjust the
white area width.
9. Repeat steps 6 to 8.
2) Paper feed timing adjustment for the 2nd, 3rd, 4th feed stations, the
LCT and duplex unit.
Refer to Paper Feed Timing Adjustment for the 1st feed station.
NOTE: Concerning the adjustment for the 1st feed station, it is necessary to
adjust the feed timing for the 1st and 2nd papers individually.
However, for the other feed stations, it is necessary to adjust the
feed timing only for the 1st paper fed.
Therefore, you can skip steps 4 and 7 of the paper feed timing
adjustment for the 1st feed station.
[D]
A176R625-2.img
5-71
PAPER FEED
[B]
Advertisement
Table of Contents
