Table of Contents
Advertisement
SERVICE CALL CONDITIONS
1.3 SCANNER
SC120 - Scanner home position sensor abnormal - stays off
Definition: [level: D]
The scanner home position sensor does not detect the on condition even
if the scanner returns home.
Possible causes:
•
Scanner home position sensor defective
•
Optics control board defective
SC121 - Scanner home position sensor abnormal - stays on
Definition: [level: D]
The scanner home position sensor does not detect the off condition even
if the scanner leaves the scanner home position sensor by 120 mm.
Possible causes:
•
Scanner home position sensor defective
•
Scanner motor defective
•
Scanner HP sensor short
SC125 - Low scanner speed
Definition: [level: D]
The scanner speed, detected by the optics control board through the
encoder, is lower than the specified speed.
Possible causes:
•
Scanner drive motor defective
•
Optics Control Board defective
SC126 - High scanner speed
Definition: [level: D]
The scanner speed, detected by the optics control board through the
encoder, is higher than the specified speed.
Possible causes:
•
Scanner drive motor defective
•
Optics control board defective
SC127 - Scanner drive motor encoder failure
Definition: [level: D]
Scanner rotating direction detected by the optics control board through
the encoder is opposite to the specified direction.
Possible causes:
•
Scanner drive motor defective
•
Optics control board defective
6-4
15 July 1996
Advertisement
Table of Contents
