Table of Contents
Advertisement
8 July 1996
[F]
[E]
A176R684.wmf
7. Remove the bushing [A] (1 snap ring).
8. Remove the drive roller [B].
9. Replace the three separation belts [C] as a set.
NOTE: When setting the tension spring [D], set it on the hook [E]
normally. The hook [F] applies higher separation pressure.
Confirm that the separation belt is correctly set between the
guides [G].
Confirm that the snap rings [H] do not touch the separation belts.
[D]
[A]
[C]
5-109
DUPLEX UNIT
[B]
[G]
A176R683.wmf
[H]
A176R685.wmf
Advertisement
Table of Contents
