Ricoh A220 Service Manual page 389

15 July 1996
[B]
[C]
4. Re-install both side fences [A] to the appropriate position according to the
paper size, as shown.
NOTE: The position of the side fence holders [B] and the pins [C] on the
lack gear differs according the paper size (from the outside pin:
A4, 11", B5).
5. Change the position of the front and rear side fences [D] (2 screws each)
and end fence [E] (2 screws) on the left tandem tray according to the
paper size.
6. Enter SP mode (refer to Service Program Access Procedure) and
access
7. Select the appropriate paper size according to position of the side and
end fences.
[A]
A176R654.wmf
[A]
SP Special Features - PAGE 7.
[E]
5-89
PAPER FEED
[D]
A176R655.wmf