COPIER INSTALLATION
A176I513.wmf
24. Install the shutter inner cover [A] (1 screw).
25. While pushing the lever [B], set the shutter cover [C].
26. Set a toner bottle by following the instructions on the decal.
NOTE: Before plugging in the power cord, install the guidance ROMs.
(-26, -27 machines) (See page 3-13)
27. Plug in the power cord, then turn on the main switch. The machine
automatically enter the process control data initial setting mode.
NOTE: Do not make any copy until completing developer initial setting.
Do not turn off the main switch during the process control data initial
setting mode.
[A]
3-10
15 July 1996
[B]
A176I514.wmf
[C]