Table of Contents
Advertisement
61202800L1-1B
IQ 710
Section 4, User Interface Guide
Page 58
option must work in conjunction with the
P
ROPRIETARY
disabled, the unit will not answer an incoming call regardless of the
the
P
ROPRIETARY
terminal, and front panel). If the
criteria are met, that unit will not attempt to dial. If the
where the DBU criteria are met and disabled on the answer unit, the call will connect (provided
A
DBU
is set to enabled on the answer unit), but data will not pass over the dial backup link.
UTO
C
>S
ONFIGURATION
YSTEM
Set the current hour, minute, and second to be used to time stamp all statistical data captured by the IQ 710.
C
>S
ONFIGURATION
YSTEM
Set the day, month, and year to be used to date stamp all statistical data captured by the IQ 710.
C
>S
ONFIGURATION
YSTEM
The time entered in this field affects the I
provides historical data for the current day. The data is divided into columns grouped by the interval of
time selected in this field. Once the maximum amount of storage time is reached, new information over-
writes existing information, beginning with the least current.
Choices: 5, 10, 15, 20, or 30 minutes.
If data is not retrieved before the Total Time Stored is exceeded, it is overwritten and can-
not be restored. Total Time Stored = History Interval Size x History Interval Count.
C
>S
ONFIGURATION
YSTEM
Traffic shaping is an optional software feature in the IQ 710 that enables the user to manage bandwidth allo-
cation. The shaping serial number is the serial number associated with the traffic shaping software upgrade. It
is an eleven character alpha-numeric case sensitive value that is used to activate traffic shaping in the IQ 710.
For instructions on how to activate the traffic shaping software, reference DLP-014, Purchasing and Activat-
ing the IQ 710 Traffic Shaping Software Upgrade. The default value is no entry in this field. This parameter is
only available through the VT 100 interface or telnet. After the shaping serial number and shaping key value
are entered correctly, the unit will reboot after the second value is entered.
C
>S
ONFIGURATION
YSTEM
Traffic shaping is an optional software feature in the IQ 710 that enables the user to manage bandwidth
allocation. The shaping key value is the key value associated with traffic shaping software upgrade. It is a
32 character hexadecimal non-case sensitive value which is used to activate traffic shaping in the IQ 710.
For instructions on how to activate the traffic shaping software, reference DLP-014, Purchasing and Acti-
vating the IQ 710 Traffic Shaping Software Upgrade. The default value is no entry in this field. This
parameter is only available through the VT 100 interface or telnet. After the shaping serial number and
shaping key value are entered correctly, the unit will reboot after the second value is entered.
IQ 710 System Manual
option is disabled, all DBU menus will still appear on all interfaces (telnet,
P
ROPRIETARY
>S
T
YSTEM
IME
>S
D
YSTEM
ATE
>H
I
ISTORY
NTERVAL
NTERVAL
>S
S
HAPING
ERIAL
>S
K
V
HAPING
EY
A
DBU
UTO
option is disabled on the unit where the DBU
P
ROPRIETARY
S
IZE
V
in the S
IEW
TATISTICS
N
UMBER
ALUE
option. If
is
A
DBU
UTO
option setting. If
P
ROPRIETARY
option is enabled on a unit
menus. The I
NTERVAL
© 2002 ADTRAN, Inc.
V
IEW
Advertisement
Chapters
Table of Contents
