ADTRAN IQ 710 System Manual page 219

CONFIGURING PVC OPTIONS FOR REMOTE SITE 1 TSU IQ (ATLANTA)
1. From the Main Menu terminal screen (Figure 20) of the TSU IQ, select option 1 for C
press . From the C
<Enter>
press The C
<Enter>.
2. From this menu, select 9, PVC O
shown.
3. Press 1 for DLCI. Press
for communication with Huntsville.
4. Press 2 for DBU DLCI. Press
Huntsville IQ 710 uses to communicate with Atlanta.
5. Press 3 for DBU P
6. Press 5 for DBU
parameter will be discussed in a different example.
Since there is only one PVC for Atlanta, there is no need to enter another entry into the PVC table.
At this point the Atlanta TSU IQ is configured for basic dial backup to Huntsville. The
PVC
PARAMETERS
© 2002 ADTRAN, Inc.
menu (Figure 21), select option 2 for N
ONFIGURATION
N P
ONFIGURE ETWORK
. Press
PTIONS
Figure 30. Configure PVC Parameters Menu
Type in 20 and press
<Enter>.
Type in 16 and press
<Enter>.
N . Press
HONE UMBER
I . Press
<Enter>.
ON NACTIVE
screen is shown in Figure 31. The remaining options may be left at their default
M is displayed.
ORT ENU
and the screen shown in Figure 30 is
<Enter>
This is the DLCI that Atlanta uses
<Enter>.
<Enter>.
Type in 12565551000 and press
<Enter>.
Press 2 for E
NABLED
61202800L1-1B
Section 6, Configuration Guides
Page 219
ONFIGURATION
P
ETWORK ORT
This is the DLCI that the
<Enter>.
. Press The G
<Enter>.
C
ONFIGURE
IQ 710 System Manual
IQ 710
and
and
ROUP