ADTRAN IQ 310 T1 NIM Quick Start Manual

S
PECIFICATIONS

Network Interface

Framing: SF / ESF with auto detection
Line Coding: AMI / B8ZS
Input signal: to -36 dB
Clock Source: network or internal
Line Build Out: 0, -7.5dB, -15 dB, -22.5dB
Data Rate: 56k or 64k
Connector: RJ-48
Compliance
FCC Part 15, Class A
FCC Part 68
Industry Canada CS03
UL and CUL
Quick Start Guide, 61202802L1-13A, March 2004
IQ 310 T1 NETWORK INTERFACE MODULE (NIM)
Technical Support 1-888-4ADTRAN (1-888-423-8726)
For more detailed documentation, visit us online at
S (
PECIFICATIONS CONTINUED
Environmental
Operating Temperature:
Storage Temperature:
Relative Humidity:
I I
NSTALLATION NSTRUCTIONS
1. Remove the power from the unit.
2. Slide the option module into the option slot until the module is firmly
seated against the front of the chassis.
3. Secure the pins at both edges of the module.
4. Connect the cables to the associated device(s).
5. Complete installation of the Base Unit.
6. Restore power to the unit.
www.adtran.com
P/N 1202802L1
)
0 to 50 C
-40 to 85 C
Up to 95% non-condensing
Copyright © 2004 ADTRAN, All Rights Reserved