ADTRAN IQ 710 System Manual page 92

61202800L1-1B
IQ 710
Section 5, Detail Level Procedures
Page 92
Perform Steps Below in the Order Listed
Terminal Configuration
1. Connect the IQ 710 unit to your VT-100 system (details found in DLP-001).
2. Login to the system (details for logging in are in DLP-002).
3. From the C
ONFIGURATION
4. From the C
ONFIGURATION
Enter the appropriate IP address.
5. From the C
ONFIGURATION
Enter the appropriate Subnet Mask.
6. From the C
ONFIGURATION
Enter the appropriate
7. Escape out to the C
Front Panel Configuration
1. From the main menu, press 1 for C
and press
<Enter>
2. From the C
ONFIGURATION
.
<Enter>
Enter the appropriate IP address.
3. From the C
ONFIGURATION
.
<Enter>
Enter the appropriate Subnet Mask.
4. From the C
ONFIGURATION
.
<Enter>
Enter the appropriate
IQ 710 System Manual
DLP-004
menu, select the S
/S menu, select the IP A
YSTEM
/S menu, select the S
YSTEM
/S menu, select the G
YSTEM
.
G IP A
ATEWAY DDR
menu and logoff by pressing <Ctrl + L>.
ONFIGURATION
ONFIG
.
/S menu, press 1 to select the IP A
YSTEM
/S menu, press 2 to select the S
YSTEM
/S menu, press 3 to select the GW IP A
YSTEM
G IP A
ATEWAY DDRESS
option and press
YSTEM
option and press
DDRESS
M
UBNET ASK
IP A
ATEWAY
and press . Then press 6 for the S
<Enter>
UBNET
.
.
<Enter>
.
<Enter>
option and press
<Enter>
option and press
<Enter>
DDR
YSTEM
option and press
DDRESS
M option and press
ASK
option and press
DDRESS
© 2002 ADTRAN, Inc.
.
.
option