3.
Telnet to the IQ 710.
From the same computer used in the previous step, Telnet to the IQ 710 and verify that the Telnet
session is properly opened (see DLP-012 for connecting to the IQ 710 using Telnet.) Once the Tel-
net session is established, press
Refer to the documentation of the computer system if you are unsure how to perform a
Telnet. Most computers running a networked version of Microsoft Windows™ or UNIX
allow a Telnet to be performed by simply typing "Telnet <IP Address>" at a command
line prompt. Telnet is a utility common on many local area networks that allows remote
access to another computer or piece of equipment.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
© 2002 ADTRAN, Inc.
to logout and close the session.
<Ctrl+L>
61202800L1-1B
Section 5, Detail Level Procedures
IQ 710 System Manual
IQ 710
Page 97