ADTRAN IQ 710 System Manual page 178

61202800L1-1B
IQ 710
Section 6, Configuration Guides
Page 178
DBU Timers
1. Press the left arrow key once and the down arrow key once to select DBU T
screen shown in Figure 11 is displayed. The default parameter values are shown below.
ERS
For basic dial backup operation, these parameters do not need to be altered from their default val-
ues. The
F T
AIL
ria have been met before entering dial backup. Once the Frame Relay link has been reestablished
on the network line, the
connecting the dial backup call. The
formed if dial backup is not established on the first call.
time between redial attempts.
IQ 710 System Manual
Figure 11. DBU Timers Menu
programs the amount of time the IQ 710 will wait once any of the DBU Crite-
IMER
R T
ESTORE IMER
R
EDIAL
sets the amount of time the IQ 710 will wait before dis-
C programs the number of redial attempts per-
OUNTER
W
AIT TO
. The DBU T
IMERS
R defines the amount of
EDIAL
© 2002 ADTRAN, Inc.
-
IM