ADTRAN IQ 710 System Manual page 104

61202800L1-1B
IQ 710
Section 5, Detail Level Procedures
Page 104
Perform Steps Below in the Order Listed
1. Connect to the IQ 710 using the DB-9 C
If you are not already connected to the IQ 710's
VT-100 compatible terminal or with a PC running VT-100 emulation software), follow the proce-
dure in DLP-001. Connecting to the
DEM only.
2. Login to the unit
3. Go to the U
TILITIES
pane menus.
4. Go to the X
FER
5. View C
URRENT
tered during the download process.
6. Select B U
EGIN
module to receive the XMODEM Upload.
When the IQ 710 is ready to receive the XMODEM upload, the menu screen will clear and display
Awaiting XMODEM Upload....<Ctrl-X> to Cancel. If this does not appear, please review the
steps above for possible configuration errors.
7. From the terminal emulation software, begin the XMODEM upload by using the appropriate com-
mand sequence. This may take several minutes.
If necessary, refer to the terminal emulation software documentation for help. Also, when specify-
ing the filename, ensure that the file transferred is the one provided by ADTRAN. Otherwise, the
update will not complete successfully.
Because XMODEM data is being transferred in-band through the menu interface, the VT-100
menus of the IQ 710 will be inoperable from the
update at any point in time within the terminal emulation software. (Please consult the documenta-
tion provided by the terminal emulation software to determine how to do this.)
8. When the update process has successfully completed, I
and M U
ODULE PDATE
IQ 710 System Manual
C
RAFT
(see DLP-002 for details)
/F U
IRMWARE PGRADE
M menu and select XMODEM.
ETHOD
S to verify the progress of the current firmware update or any errors encoun-
TATUS
to start the update process. Enter Y to confirm the transfer and set up the
PDATE
C displays in the P
OMPLETE
DLP-007
/C interface on the back of the unit.
RAFT ONTROL
C /C
RAFT ONTROL
/C port limits the upgrade procedure to XMO-
ONTROL
.
menu and press the right arrow key to access the right-
C /C
RAFT ONTROL
displays in the C
DLE
S
REVIOUS TATUS
port (either with a
interface. You can cancel the
S
URRENT TATUS
field.
© 2002 ADTRAN, Inc.
field