ADTRAN IQ 710 System Manual page 101

8. Select B U
EGIN
module to receive the TFTP Upload.
During the TFTP upload process, various status messages display in
indicate progress. The following table describes these messages.
Message
TFTP Upload in
Progress
Module Update in
Progress
Module Update
Complete
TFTP Error:
Timeout
TFTP Error: File
Not Found
9. When the update process has successfully completed, M
C S
URRENT TATUS
The IQ 710 will restart immediately and resume operation. The user may then telnet back into the
unit.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
© 2002 ADTRAN, Inc.
to start the update process. Enter Y to confirm the transfer and to set up the
PDATE
Indicates communication with the TFTP network server has been
established and the update file is being transferred between the IQ 710 and
the TFTP network server.
The IQ 710 is now writing the code file into the flash (RAM to ROM).
Indicates the IQ 710 successfully received the update file.
This message will appear if the TFTP server IP address is incorrect.
Indicates the TFTP network server was unable to locate the specified
filename or path in the TFTP Server Filename field. Filename may be
incorrect.
field.
Section 5, Detail Level Procedures
C
URRENT
Meaning
U C
ODULE PDATE OMPLETE
61202800L1-1B
IQ 710
Page 101
to
U S
PDATE TATUS
displays in the
IQ 710 System Manual