ADTRAN IQ 710 System Manual page 130

Hide thumbs Also See for IQ 710:
Table of Contents

Advertisement

61202800L1-1B
IQ 710
Section 5, Detail Level Procedures
Page 130
Dial Options during DIal Backup (for V.34, BRI ISDN, and DCE DBU modules):
1.
The H
option will terminate the current dial backup session and attempt to reestablish com-
ANG UP
munication on the dedicated line.
2.
The T
O
B
URN
FF
session.
Dial Options during DIal Backup (for PRI DBU module):
1.
The E
D
NTER
IAL
phone number entered.
2.
The H
U
P
ANG
P
phone number entered.
3.
The H
U
S
ANG
P
the dial backup session to a specific site. The site number may be obtained from the call manager
menu.
4.
The H
U
A
ANG
P
5.
The T
O
B
URN
FF
session.
Front Panel Directions
Dial Options When Dial Backup is Idle (all DBU modules):
1.
Press 4 for D
IAL
2.
The cursor will then be flashing on 1 for D
selected, the IQ 710 will remain on the leased line and will not enter dial backup mode. The S
L
option is not available with a PRI DBU card installed.
ON
EASED
3.
The cursor will then be flashing on 1 for E
4.
Enter the phone number and press <Enter>.
5.
Press 2 for D
IAL
Dial Options during DIal Backup (for V.34, BRI ISDN, and DCE DBU modules):
1.
Press 4 for D
IAL
2.
Press 1 for H
ANG UP
to reestablish communication on the dedicated line.
3.
Press 2 for T
URN
the current DBU session.
IQ 710 System Manual
option will discontinue the audible beep for the duration of the current DBU
EEP
# option will force the unit to attempt dial backup to the site corresponding to the
# option will disconnect the DBU session to the site corresponding to the
HONE
# option is only available on the terminal interface. This option will disconnect
ITE
C
option will disconnect all dial backup sessions currently active.
LL
ALLS
option will discontinue the audible beep for the duration of the current DBU
EEP
and press <Enter>.
and press <Enter>. The unit will then initiate a manual dial backup session.
and press <Enter>.
and press <Enter> to terminate the current dial backup session and attempt
O
B
and press <Enter> to discontinue the audible beep for the duration of
FF
EEP
B
. Press <Enter>. If S
IAL
ACKUP
D
#. Press <Enter>.
NTER
IAL
L
is
TAY ON
EASED
TAY
© 2002 ADTRAN, Inc.

Advertisement

Table of Contents
loading

Table of Contents