Table of Contents
Advertisement
61202800L1-1B
IQ 710
Section 5, Detail Level Procedures
Page 138
Perform Steps Below in the Order Listed
1.
Connect the IQ 710 ethernet port to a hub on the local LAN.
2.
From a computer system connected to the LAN, Telnet to the IQ 710 IP address.
Refer to the documentation of the computer system if you are unsure how to perform a
Telnet. Most computers running a networked version of Microsoft Windows or UNIX allow
a Telnet to be performed by simply typing "Telnet<IP Address>" at a command line
prompt. Telnet is a utility common on many local area networks that allows remote access
to another computer or piece of equipment.
3.
The following login screen will appear:
4.
Enter the appropriate password. The default password is adtran (all lowercase).
5.
The following screen will appear:
IQ 710 System Manual
DLP-013
© 2002 ADTRAN, Inc.
Advertisement
Chapters
Table of Contents
