ADTRAN IQ 710 System Manual page 234

61202800L1-1B
IQ 710
Section 6, Configuration Guides
Page 234
4. Use the right arrow key to select DLCI. Press
DLCI that Montgomery uses for communication with Huntsville.
5. Select DBU DLCI. Press
ville IQ 710 uses to communicate with Montgomery.
6. Select DBU P
HONE
7. Select DBU
ON
Since there is only one PVC for Montgomery, there is no need to enter another entry into the PVC
table. At this point the Montgomery IQ 710 is configured for basic dial backup to Huntsville. The
C PVC O
ONFIGURE
default values. These features are not related to dial backup. For an explanation of these features,
please refer to the User Manual.
IQ 710 System Manual
Type in 17 and press
<Enter>.
N . Press
<Enter>.
UMBER
I . Press
<Enter>.
NACTIVE
screen is shown in Figure 46. The remaining options may be left at their
PTIONS
Figure 46. Configure PVC Options Screen
Type in 20 and press
<Enter>.
<Enter>.
Type in 12565551000 and press
Select E . Press
NABLED
This is the
<Enter>.
This is the DLCI that the Hunts-
<Enter>.
<Enter>.
© 2002 ADTRAN, Inc.