ADTRAN IQ 710 System Manual page 123

Perform Steps Below in the Order Listed
Terminal Configuration
Enter the IP Address:
1. Connect the IQ 710 unit to the VT-100 system (details found in DLP-001).
2. Login to the system (details for login found in DLP-002).
3. From the C
ONFIGURATION
4. From the C
ONFIGURATION
the appropriate IP address and press <Enter>.
5. From the C
ONFIGURATION
Enter the appropriate S
6. From the C
ONFIGURATION
<Enter>. Enter the appropriate G
Enter the Management DLCI:
1. From the C
ONFIGURATION
2. From the C
ONFIGURATION
<Enter>. Enter the appropriate DLCI and press <Enter>.
3. If more than one management DLCI is being used, select the M
C
ONFIGURATION
<Enter>.
Enter the Management DLCI Mode:
1. From the C
ONFIGURATION
<Enter>. Select D
used to carry customer traffic), and press <Enter>.
2. If more than one management DLCI is being used, select the M
C
ONFIGURATION
DLCI is used only to manage the IQ 710 (and not used to carry customer traffic), and press
<Enter>.
3. Logoff by pressing <Ctrl+L>.
© 2002 ADTRAN, Inc.
DLP-010
menu, select the S
/S menu, select the IP A
YSTEM
/S menu, select the S
YSTEM
M and press <Enter>.
UBNET ASK
/S menu, select the G
YSTEM
ATEWAY
menu, select N
/N P
ETWORK ORT
/N P menu and press <Enter>. Enter the appropriate DLCI and press
ETWORK ORT
/N P
ETWORK ORT
if the management DLCI is used only to manage the IQ 710 (and not
EDICATED
/N P menu and press <Enter>. Select D
ETWORK ORT
Section 5, Detail Level Procedures
option and press <Enter>.
YSTEM
option and press <Enter>. Enter
DDRESS
M
UBNET ASK
IP A
ATEWAY
IP A and press <Enter>.
DDRESS
P and press <Enter>.
ETWORK ORT
menu, select the M
ANAGEMENT
ANAGEMENT
menu, select the M
GMT
GMT
61202800L1-1B
Page 123
option and press <Enter>.
option and press
DDRESS
DLCI 1 option and press
DLCI 2 option from the
DLCI 1 M option and press
ODE
DLCI 2 M option from the
ODE
if the management
EDICATED
IQ 710 System Manual
IQ 710