ADTRAN IQ 710 System Manual page 187

At this point all PVC Options have been configured for basic Frame Relay dial backup to Atlanta and Bir-
mingham. The PVC entries on the Huntsville IQ 710 should look like the screen shown in Figure 22. The
remaining options may be left at their default values. The
, and options are features not related to dial backup. For an explanation of these features,
S
SUREMENT TATS
please refer to the IQ 710 User Manual.
Atlanta IQ 710 (DLCI 17)
1. Use the right arrow to select DLCI; then press
2. Use the right arrow to select DBU DLCI; then press
Notice that the TELCO-assigned DLCI of 16 for Atlanta's Frame Relay link to Huntsville is pro-
grammed in the DLCI field. The TELCO-assigned DLCI of 16 for Huntsville's Frame Relay link to
Atlanta is programmed in the
operation.
3. Use the right arrow to select DBU P
press . The phone number that the Atlanta IQ 710 will dial to reach the Huntsville IQ 710 to
<Enter>
establish a dial backup connection has now been programmed.
© 2002 ADTRAN, Inc.
Figure 22. Huntsville IQ 710 (DLCI 17) Screen
field. These two entries are critical for proper dial backup
DBU DLCI
N
HONE UMBER
Section 6, Configuration Guides
,
CIR S N
EQUENCE UMBER
. Type in 17 and press
<Enter>
. Type in 16 and press
<Enter>
; then press
<Enter>
61202800L1-1B
IQ 710
Page 187
,
C D M
HECKING ELAY
.
<Enter>
.
<Enter>
. Type in 12565551000 and
IQ 710 System Manual
-
EA