Introduction; Unpack And Inspect The System; Contents Of Adtran Shipments - ADTRAN IQ 710 System Manual

61202800L1-1B
IQ 710
Section 3, Network Turnup Procedure
Page 32
1.

INTRODUCTION

This section discusses the installation process of the IQ 710 system.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic modules can be damaged by static electrical discharge. Before handling mod-
ules, wear an antistatic discharge wrist strap to prevent damage to electronic components.
Place modules in antistatic packing material when transporting or storing. When working
on modules, always place them on an approved antistatic mat that is electrically
grounded.
2.

UNPACK AND INSPECT THE SYSTEM

Each IQ 710 is shipped in its own cardboard shipping carton. Open each carton carefully and avoid deep
penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier, then contact ADTRAN Customer Service (see Warranty
and Customer Service Information in the front of this manual).

Contents of ADTRAN Shipments

Your ADTRAN shipment includes the following items:
• The IQ 710 Base Unit
• The IQ 710 System CD including the User Manual and ADTRAN Utilities
• RJ-45 to RJ-45 cable - ADTRAN P/N 3127004
• AC power cord - ADTRAN P/N 3127031
• Network Interface Module and appropriate contents (depending on system level part number)
– 4202801L1
– 4202802L1
– 4202803L1
– 4202811L1
– 4202812L1
– 4202813L1
Refer to the individual Network Interface Module shipping contents on pages 5 and 6 for
additional information.
IQ 710 System Manual
IQ 710 with 56k/64k Network Interface Module
IQ 710 with T1 Network Interface Module
IQ 710 with T1 with DSX Network Interface Module
IQ 710 with 56k/64k Network Interface Module and Traffic Shaping
IQ 710 with T1/FT1 Network Interface Module and Traffic Shaping
IQ 710 with T1/FT1+DSX-1 Network Interface Module and Traffic Shaping
© 2002 ADTRAN, Inc.